good afternoon I am working with a fork positioner attachment I need the cylinders.
its currently on a Hyster H155XL F006A03721L. This attachment has an information plate "Swing Shift MFG. INC" also a model : 27602-60 & serial: 90100016. I been researching and the brand is Brudi-swing shift. So it takes me to Bolzoni attachements I contacted them and they told me they bought the name but only got the push pulls line , that I had to contact Allied Systems.....so I did and this is what they told me...."I don't have any information on this attachment
My coverage stops at 27559 than starts again at 27660" so with that information I am back to where I started. They asked for the cylinder numbers but cylinders don't have any.
if someone has a distributor that works with this brand or some information please let me know.
I have a mad client right now that wants his forks working yesterday.
Thank you for reading!
Showing items 1 - 6 of 6 results.
the cylinders may have numbers etched on them with a lazer etcher, they can be hard to find and see unless they are totally clean.
also try taking a snapshot of the data tag and sending that to Bolzoni or Allied. Or even your local hyster dealer and see if they can help.
Try Rightline Equipment in Oregon, 800-547-6300
forklift action blocked the search engine I suggested...you know the one...starts with a G.
Have you tried Cascade Hyd. for some reference help ? They can usually point you in the right direction. As you probably know most ser. # are stamped on the barrel between the fittings some where. (but not always the case). Cascade rebuilds pretty much anything.
Do a google...and good luck.
Fergie
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.