I would like to change the parameters of the curtis 1243 sepex drive mounted on a (BT LPE 200) electric pallet truck, and I have to use a CURTIS 1313-4331 programming key (OEM), but when i use the controller curtis 1313 and in the menu parameters i did not find the original parameters of the controller CURTIS by consequence i found other parameters such as ( module ID , TX COB , RX COB) which are visible only when disconnecting the control card located at the handl, and when connecting this card the programmer displays an error message (controller does not support this function),
i do not understand why the parameters of the controller concernat the motor do not appear in the programmer CURTIS 1313-4331 (OEM)