Showing items 1 - 15 of 16 results.
Could I also get a copy of that wiring diagram for the GLC030AFNUAE082.?
mark @ mn-ice. com
For anyone reading this forum with the same problem.The Black/White wire from the distributor goes to the positive side of coil and the Blue wire goes to the negative side of the coil.
RedBull thanks for the help and thanks to everyone else that offered help.
check now I put the number2 instead of too
BigWahooToo(at)gmail(dot)com
No I don't see it. I checked my spam folder and it's not in there either.
email is [email address removed]
Yes I would appreciate a copy BigWahooToo(at)gmail(dot)com
Thanks,Bob
do you still need wiring diagram if so send email I have a copy
Thanks for the replies Swoop & Mrfixit.
I'm going to wire it up today and see what happens, hopefully I won't let the smoke out.
I've Googled every term. I can think of but haven't found a wiring diagram anywhere.
Thanks again Bob
I believe the 2 wires from the distributor just go to the coil. Blue on positive, black on negative, and then there should be a live wire (when the key is turned on) from the harness that also goes to the positive coil terminal also.
i dont have any diagrams on that old of a model, maybe someone else can help out but the complete model and serial number is very helpful for anyone that can help. thanks
I finally got back out to the property yesterday and loaded a 30 yard dumpster by hand. I hope I can get the forklift running for the next one.
The model of the forklift is:GLC030AFNUAE082.
The serial # is B809N02729Z.
Any help with wiring the ignition will be appreciated.
Thanks for the reply, I will get the rest of the required information.
I will have to get all the information next time I am out at the property, I had it all on my phone but of course my phone crashed.
It's a propane engine and I believe it is a Mazda.
Thanks again for your reply
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.