seat shutoff safety sensor too sensitive - Technical Troubleshooting discussion in Forkliftaction's forums

Linde (& Baker) E15:
seat shutoff safety sensor too sensitive

how can we adjust or eliminate the sensor in the seat that ensure that someone is aboard?
this one will shut us down with every little bump.

Posted 25 May 2018 04:13
Discussion started by umunderpar
Massachusetts, United States

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

Thank you

Posted 28 May 2018 22:09
Reply by umunderpar
Massachusetts, United States

Post a Reply Report this post

You can eliminate the seat switch by placing a bridge wire on the 2 connectors that go to the seat switch.
Only a temp measure as health and safety will be all over you if an accidents occurs.
Try it and see if the problem goes, if it does then remove the seat and check adjustment under the seat base.

Posted 28 May 2018 19:20
Reply by Lindetech
Auckalnd, New Zealand

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.