Engine shut down in 30 seconds - Technical Troubleshooting discussion in Forkliftaction's forums

Yale GLC060TGNUAE084:
Engine shut down in 30 seconds

Model not listed in here so it's a glp080vxnase090. F813v02425e. Unit shows to be in start cycle. Starter won't crank. F7 fuse has no power. Replaced relay for start and tested circuits. Relay clicks on but no input power to relay thus no power to f7. Shows a error code for rear taillights. No other errors are present. Customer had 2 wires to start unit direct to starter and would start and run fine. Inspected pdm and no visible damage or signs of fault.

Posted 27 Jan 2018 01:32
Discussion started by ron_k
North Dakota, United States

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

this might sound rediculous but repair the tail light circuit fault
on the newer model trucks if the tail lights dont work it is now considered a safety feature and will shut the truck down from what i understand

Posted 29 Jan 2018 09:46
Modified 29 Jan 2018 09:49 by poster
Reply by swoop223
North Carolina, United States

You've been swooped!
swoop223@gmail.com

Post a Reply Report this post

Are you seeing a specific fault code?

Posted 29 Jan 2018 01:00
Reply by BREWSKI
Nebraska, United States

Post a Reply Report this post

If you have lost power to the F7 fuse your problem is in the PDM. The fuses are fed from the primary positive rail inside the PDM.

Posted 29 Jan 2018 00:59
Reply by BREWSKI
Nebraska, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.