Showing items 1 - 5 of 5 results.
Lp injection module bad. It happens when the grounds are disconnected or bad on the frame and the battery is disconnected. Code 23 is mostly caused by bad frame grounds.
listed possible causes for the E35 error are as follows:
- open or short detected in the fuel injection circuit
- broken wire(s) in the harness (at the injector)
- damaged or loose pin in the fuel injector connector or ECM connector
- failed EGI2 relay or main C relay
- loose connection at the base of the relay box 2 (blue relay box)
- open or short internally in the relay box 2
- fuel pressure too high at the injector
- failed injector
- failed ECM
there is also a note in the HPK document stating that high pressure washing can cause this error due to water entering the ECM connectors, injector driver connector, relay box, fuse box, fuse holder(located under the main injector) or main injector coil.
Happy hunting :o)
Check 5 amp injector fuse at injector
Forklift YOM is 2008. Model name is U1D2A25LQ. Error message on the screen is "Fuel injection disconn".
e35 in my book says it is the LPG injector open circuit malfunction.
What year is this unit's manufacture? there was a change in ECM in 2007 that can set this code if the wrong year ECM is used
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.