Prime Mover RTX35 error codes E121 & E132 - Design & Engineering discussion in Forkliftaction's forums

Discussion:
Prime Mover RTX35 error codes E121 & E132

Model RTX35 S/N 35207002.
Have these error codes and I have been told that they refer to the steer chopper. When turning the steering wheel I get only about 1 to 2 volts at the p/s motor and then the code shows up.
Need to know where the steer chopper is located, and any checks that can be made to it. Any other info that might help would be appreicated.

Posted 1 Oct 2008 10:26
Discussion started by tom_v
United States

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

"chopper" modules are either a large transistor
or a bank of FET's on a heatsink
they "chop" the motor voltage creating the PWM to control motor speed

they probably failed open (fried)

some trucks they are external others they are internal (in the card)
i would assume for steering they would be in the steer card

i dont know this machine but i would try to track the steer motor cables back to its controller

id also go get the book if it was me

Posted 3 Oct 2008 10:02
Modified 6 Oct 2008 01:48 by poster
Reply by justinm
New York, United States

New York, New York its a heluva town..you know that The Bronx is up..and I'm Brooklyn down

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.