Really need help Fault Code 524230-3 - Technical Troubleshooting discussion in Forkliftaction's forums

Hyster H155FT:
Really need help Fault Code 524230-3

My fork lift dont want to start and show this Fault Code 524230-3 i really need help to fix it

Posted 27 Oct 2016 10:49
Discussion started by jesus_v
Not Applicable, Mexico

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

DTC 524230-3 - Rear Work Lights Relay (RL7) Driver Output OORH.
A. SAFETY SWITCH (IF EQUIPPED) IS DISCONNECTED
B. SHORT ON RELAY DRIVER OUTPUT TO UNSWITCHED BATTERY (SEE WARNING BEFORE CONTINUING)
C. SHORT ON RELAY DRIVER OUTPUT TO SWITCHED BATTERY.
D. SHORT ON RELAY DRIVER OUTPUT TO ANOTHER OPERATED DEVICE
E. CONTROLLER DRIVER OUTPUT TO RELAY COIL OPEN CIRCUIT
F. RELAY COIL OR GROUND CONNECTION OPEN CIRCUIT
G. FUNCTIONAL FAILURE IN CONTROLLER

Posted 27 Oct 2016 23:21
Reply by BREWSKI
Nebraska, United States

Post a Reply Report this post

Yeah you need your local dealer to come and fix it.
There is a software upgrade you need.

Posted 27 Oct 2016 20:43
Reply by stam
Ontario, Canada

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.