I need some help!
We bought a Linde H40T, when we start the machine on the screen shows error code L247...lift and lower -works, but tilt not work and forks movement also..any ideas?
Also when selected reverse, immediately shows error T235 and all functions is blocked, it's moves only forward.
I will be grateful if someone gives any information!
Thanks in advance!!!
Regards,
Ivaylo
Showing items 1 - 2 of 2 results.
Hi little forker,
sorry for my late answer and thank you for your advice...so here is what is the situation now with this machine:
direction switch - replaced
a few element in tilt angle sensor mechanism was broken - replaced
Now the machine is working but that fault code L247 remains... it has movement(forward-reverse), lift-ok, tilt-ok, forks movement(left-right)-ok but no separation of forks and now when I can move the machine I found that it's has no 2-speed it moves only on 1-st, the engine is revving but don't speed up...I don't have pathfinder.
I hope for some help to know where I haed to!
Thanks in advance!
Best regards,
Ivaylo Petkov
T235 - faulty direction switch
L247 - possibly the tilt angle sensor? Do you have access to pathfinder? When you say the lift/lower is working, is the engine revving automatically when you lift?
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.