Triple Mast getting stuck (comparison videos linked) - Technical Troubleshooting discussion in Forkliftaction's forums

Hyster H60XM:
Triple Mast getting stuck (comparison videos linked)

Brand new to me. Just going through the whole machine. The first time I raised the triple fork mast, it would only return 2/3 the way and then tries to over run and pinch the hose.

Here is a video I uploaded showing how the mast will telescope up fine. Then, about 2/3 the way down the intermediate portion will start to pinch the hose and the chassis also stops.

My video: youtube.com/watch?v=TxpUr30fWM0&feature=youtu.be

When compared to this video, it looks like the center intermediate mast chassis is staying up too long:

Reference video: youtube.com/watch?v=IKcz1k2paKY

and: youtube.com/watch?v=f-HGk9ZYTu8

Posted 14 Jan 2016 02:09
Modified 14 Jan 2016 02:10 by poster
Discussion started by actionpaintball
Virginia, United States

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

No problem friend.

Posted 15 Jan 2016 06:20
Reply by stam
Ontario, Canada

Post a Reply Report this post

Thanks stam...I just cleaned the portion that was sticking and greased it up. Ran it up and down a few times and it fell on its own. Back to work.

Posted 15 Jan 2016 04:56
Reply by actionpaintball
Virginia, United States

Post a Reply Report this post

Mechanical binding.
Check mast roller bearings, lube rear sliders, lube mast channels.

Posted 14 Jan 2016 04:45
Reply by stam
Ontario, Canada

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.