Hyster H50XM:
no spark

have an early 90's hyster H50XM s/n H177B25234Y. Not getting any spark. Oil pressure switch seems to be good. What controls the spark beside oil pressure. Any ideas how to check the module in the distributor?

Any help would be appreciated
  • Posted 26 Feb 2015 09:27
  • Discussion started by louis_r
  • Arizona, United States
Showing items 1 - 2 of 2 results.
what type of electronic ignition do you have- one module in the distributor only, or one module in the distributor & a control box for the ignition somewhere near the ignition coil?

If you're not sure- send a pic of the module in the distributor to me
  • Posted 19 Apr 2016 00:53
  • Reply by bbforks
  • Pennsylvania, United States
bbforks (at) Hotmail (dot) com
Customers love technology- until they have to pay to fix it!
You may want to check the continuity of the coil inside the distributor under the rotor that plugs into the module. It should measure 800 ohms.
  • Posted 14 Apr 2016 12:33
  • Reply by manfred
  • North Carolina, United States

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Global Industry News
edition #1228 - 1 May 2025
There is simply no ignoring the push for a greener, more sustainable materials handling equipment industry as manufacturers and customers alike seek eco-friendly solutions to reduce or eliminate carbon emissions... Continue reading