Intermittant code 5A then 59 - Technical Troubleshooting discussion in Forkliftaction's forums

Raymond EASI REACH:
Intermittant code 5A then 59

Its for an EASI reach model and have the book but those codes are not listed. I can not duplicate issue but the operator has written these codes down. Battery was at 30% and had the customer change it out to see if it was a battery issue.

Posted 21 Oct 2014 05:42
Discussion started by tomas_s
Bahamas, Bahamas, The

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

OK found out what the issue was for intermittent code 5A.

Check your static straps!!!

Installed a small chain connected to unit with a hose clamp and unit has been running fine ever since with no issue.

Posted 25 Oct 2014 04:19
Reply by tomas_s
Bahamas, Bahamas, The

Post a Reply Report this post

Found out these codes are for a CAN bus communication issue. The technician I talk to said to check for bad or dirty connection on the A/C motor controller box or vehicle manager. Also said to check the CAN bus resistor. Will post what I find out when I have a chance to put hands back on the truck but know if I did not post this now I would forget.

Posted 23 Oct 2014 04:19
Reply by tomas_s
Bahamas, Bahamas, The

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.