Showing items 1 - 9 of 9 results.
Hello, I think my poblem is similar.
Yesterday I recaived my mc 20hp buggy forklift, but it doesn't drive properly - slow both forward and back. I don't have any manual and I could't find on web. Anyone have such manual or repair guide?
Michał
Towmotor check your mail
Regards
filipe p email address advancedlifttruck at hot mail dot com thanks towmotor
swoop223 manitou mc50 154734 two wheel drive two speed transmission slips in low gear. whose transmission is it. thanks towmotor
i think it is a clark transmission T12000
swoop223 manitou mc50 154734 two wheel drive two speed transmission slips in low gear. whose transmission is it. thanks towmotor
thanks swoop223, they gave me the wrong model,waiting for the correct information.
actually with these piggyback type units they do not have what most would think is a 'transmission'.
They are driven by a hydraulic motor system.
The main pump and hydrostat control is mounted to the engine, this controls ALL hydraulics on the machine (even the drive).
If you are having drive problems, no travel or slow travel or what appears to be slipping you need to check pump pressure. Also check the control solenoids that control the flow for the drive motor. Also check the swash plate control levers on the pump/hydrostat control and make sure it is moving freely and not slipping.
you will most likely need a service manual to troubleshoot this effectivly.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.