Yale GLP100MJN:
New fuel system and still problems

This truck has a new injector pump on it and the injectors have been tested but still you have to hold the glow plug button to get it to start. When it starts it runs rough and smokes bad !!!! any sugestions ?
  • Posted 16 Jul 2013 04:42
  • Discussion started by dale_w
  • Missouri, United States
Showing items 1 - 5 of 5 results.
Dale W;
Have valve adjustments been checked, is the pump's number one been spill tested for injection timing, what diesel engine are you dealing with? A Nissan engine is always preheated before it's to be turned over. What is the cranking speed of the engine and do we have a load on it while it's cranking (HYD). A previous post asked about the exhaust smoke's color. Has the engine's head been worked on and what other repairs were dome on the power unit just before this issue started? I've seen a few strange reasons for a diesel not starting, and the one of the strangest one was a gas crank used in place of a diesel crank. The first step to take now is to determine what the cylinder combustion pressure readings are vs what they should be.
  • Posted 17 Jul 2013 12:29
  • Reply by MEngr
  • Missouri, United States
What colour is the exhaust smoke, is it black or blue/white would you say the running is erratic,

Some possible areas to check defective stop unit,
Restriction on induction system
Restriction in fuel pipe is it a banjo fitting onto the fuel filter feed pipe dirt can collect at this point.
Sticking valves , broken springs incorrect valve tip clearance
Defective injectors incorrect pump timing
Poor compression.
Hope there's some ideas for you to check out

Regards Titus
  • Posted 17 Jul 2013 03:58
  • Reply by Titus
  • North Yorkshire, United Kingdom
did you bleed out the injection pump after reinstalling it?
then bleed the injectors?

any air in the system will make the engine run badly and smoke
  • Posted 16 Jul 2013 22:42
  • Reply by swoop223
  • North Carolina, United States
You've been swooped!
swoop223@gmail.com
it was just kinda hard to start before the fuel system was gone through but now it barely runs
  • Posted 16 Jul 2013 05:11
  • Reply by dale_w
  • Missouri, United States
How about a bad piston/rings ?
  • Posted 16 Jul 2013 05:01
  • Reply by mrfixit
  • New York, United States

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Toplift Ferrari TFC36-48
Stoney Creek, Ontario, Canada
Used - Sale
USD1
UN Forklift FGL18T
HANGZHOU, Zhejiang, China
New - Sale
Global Industry News
edition #1234 - 12 June 2025
As a journalist focussed on the materials handling sector, it is difficult not to notice the regularity of news stories that detail injuries to – or worse still the deaths of – forklift operators... Continue reading
Movers & Shakers
Manojit Acharya Manojit Acharya
APAC vice president, Jungheinrich
Senior VP direct sales and marketing, Daifuku Intralogistics America
Regional sales manager for Malaysia and Singapore, Libiao Robotics
Area sales manager - Spain, Trex Parts
Elwell-Parker ESI500-36
Coraopolis, Pennsylvania, United States
Used - Sale & Hire
JCB 533-105
Braeside, Melbourne, Victoria, Australia
Hire

Showcased in the Virtual Expo

Taylor THC500L
Coraopolis, Pennsylvania, United States
Used - Sale & Hire
SMV (Konecranes) 4535TB5
Balling, Denmark
Used - Sale
Your Focus
Upcoming in the editorial calendar
WIRELESS CHARGING
Aug 2025
MANAGING MIXED FLEETS
Oct 2025