Showing items 1 - 15 of 27 results.
Missing B(plus) on one of the small fusses in the back with key switch on==> Acid damaged wires in harness under the battery (different color wire spliced together)
Hi guys
I'm getting trouble code 11, 515, 530
When the do the self diagnostic test on the dash it's coming up "t-fuse 527" and "open/voltage under 531"
Any advise much appreciated
Hey y'all,
I'm new on here, I saw you said you Got it.
I'm having trouble with the same kind of forklift.
Nissan 36v electric CWP02L20S.
CODE 011 and 015 we've checked everything and run a self test, and it'll clear the codes, but when I put it in gear forward or reverse, I get the wrench pic and traction 011 code.
PLEASE HELP.
THANKS IN ADVANCE.
Dear Sir,
We have Nissan GQ02 series battery operated forklift. We are facing traction trouble 011 issue and error codes are 515, 530. Checked traction motor, transistors, diodes as per manual and found OK but problem not yet resolved, when we depress accelerator pedal FvR contactor released. Please help us to resolve the issue
This is a transistor control track
Missing B(plus) on one of the small fusses in the back with key switch on==> Acid damaged wires in harness under the battery (different color wire spliced together)
We are also facing same issue. Did u find the solution for thaat trouble
Same problem we are facing in our forklift. Did u find out the solutin
If my memory serves me right I remember during acceleration there is a second set of clicks when increasing speed like an overdrive. Not on this fork truck but another that is working properly.
Also forward and reverse contacts will kick out and then reset once you let off the accelerator pedal
Missing B+ on one of the fusses in the back with key switch on. Acid damaged wire in harness under the battery (different color wire spliced together)
Check for B+ voltage all the small fuses
Running into the same problems. Followed trouble shooting tree and checked all fuses. Checked current sensor and swapped controller and associated equipment also. No success. Swapped print board also. No success. Stoned motor and checked brushes and blew out motor. Any thoughts??? Also battery is on floor beside forktruck.
Missing B+ on one of the fusses in the back with key switch on. Acid damaged wire in harness under the battery (different color wire spliced together)
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.