Showing items 1 - 5 of 5 results.
Hi I have jungheinrich software, I can help you just contact me
Hi
Mine is givin "ALARM PUMP CONTROL 49", serial 89.91.53.56
Can i have the service manual for this forklift? Or what this error(alarm) means..
Thanks.
I will get the serial next week for you. It uses Jungheinrichs own MP616k controller its a combi traction sepx ex controller with a series pump.
The truck works fine with or without the display. However if we connect the display up it appears on the display Alarm 34 no pump connection.
It was a controller purchased and fit onto a truck that did not have a controller due to the original control system being blown by the engineer whilst working on it during servicing I think.
display out, error code 34. Display as can bus.
Hello Elektrodrive
How I see error 34 is can bus problem,wiring or resistor or electronic unit.Can you send serial from truck because I cant remember is it that Danaher grey unit or some different.And please again explain what you do when you dont have display, or part of him,is he ok?
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.