Trying to remove drive motor - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
Trying to remove drive motor

Linde H30D

serial number H2X393T07111
trying to get the LH side drive motor out to rebuild. removed the 16 bolts and all hyd hoses and fittings but motor will not come loose. is there something else that holds this motor in the housing?
Thanks

Posted 13 Jun 2014 05:34
By joep56
joined 13 Jun'14 - 8 messages
Texas, United States

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

rmo mast to start with!

Posted 31 Oct 2014 09:57
By forkup
joined 25 Oct'14 - 11 messages
Massachusetts, United States

Post a Reply Report this post

There are two holes within that 16 bolt perimeter that you can thread two of the mounting bolts in and push the motor out. Make sure the holes are cleaned out and that you turn them in evenly.

If I recall the holes are at about 3 o'clock and at 9 o'clock.

Posted 27 Jun 2014 12:27
Modified 3 Jul 2014 03:30 by poster
By IFD45
joined 28 Feb'13 - 31 messages
Wisconsin, United States

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.