Hi Experts for Crown,
Crown WP2315S, freezer aplication
I have problem with pontenimeter (F/R), changed it serveral times, about 1-2 months. It is failed, the truck can not Fw or R, sometimes forward is ok but no backward
Anyone have experienced this, pls share me info to solve it
My manager complainted me so much because of changed many pontenimeters for these trucks
Thanks in advance
Showing items 1 - 5 of 5 results.
the heather is only a resistor as you know, but may be a crack wire or a internal fail. may be works for a little time and after the heater fail and at this time the frozen damage the pot.
you already test the WP, in a warm enviorment for a long time?
should be a fail in the heater and this broken the pot.
Hi Raul S,
Just I checked pot and it's failed. Not yet check the heater
what causes the heater broken ?
Did you experience this, how to check, pls share your ideal ?
Thanks
This have heater for pot.
If checking wiring for a short caused that why the truck runs ok when replacing new one ? whether have another reasons
How understand overworking for this ?
If this is a freezer application truck is the heater for the pot working and/or overworking (literally burning pot)? I would also check the wiring for a short that is causing the pot to fail
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.