1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. No Dash Display

Discussion:
No Dash Display

Well I am new here and I have a problem. I hope someone can help me out. EV100 ZM Card I have no dash diplay at all. I put the dash into another lift and it works.I checked my voltage and ground to dash 5 Volts. I installed hand set and it displays on hand set. I also have checked the wiring from card to the dash display. Found nothing there, Removed Y plug pulled all wires out 1 at a time and made sure all plug ends was making good connection.Also everything else works fine hydraulics,forward/reverse

Confused Any help would be great to point me in the right Direction
  • Posted 10 Oct 2010 04:57
  • Modified 10 Oct 2010 05:41 by poster
  • By ryan_r
  • joined 10 Oct'10 - 8 messages
  • Ohio, United States
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Fact of the week
Funerals in Spain typically occur within 24 to 48 hours of death, whereas in other European countries they wait one or more weeks. This rapid timeframe is a cultural norm grown from the past need to manage the warm climate without modern embalming.

PREMIUM business

Hawker Powersource, Inc.
HAWKER® offers a range of hybrid motive power solutions customized to adapt as your operation's needs change.
Hawker Powersource, Inc.
Fact of the week
Funerals in Spain typically occur within 24 to 48 hours of death, whereas in other European countries they wait one or more weeks. This rapid timeframe is a cultural norm grown from the past need to manage the warm climate without modern embalming.