Discussion:
ignition problem

i have an ignition issue, first no spark from distributor, coil is good points are good and not grounded, condensor is new cap is new ,rotor is new ,wires are new cannot figue what is wrong
  • Posted 24 Aug 2010 00:05
  • By indianbil
  • joined 23 Aug'10 - 2 messages
  • Colorado, United States
Showing items 1 - 2 of 2 results.
edited since I didn't read far enough in the original post

:-)
  • Posted 24 Aug 2010 08:01
  • Modified 24 Aug 2010 08:03 by poster
  • By edward_t
  • joined 5 Mar'08 - 2,334 messages
  • South Carolina, United States
"it's not rocket surgery"
Check for positive power at the + terminal on the coil with the key on. If so then you have a problem with the points like being dirty, not closing or opening. If you don't have power at the + coil terminal, with the key on, then a fuse or the ignition switch or wiring is bad.
  • Posted 24 Aug 2010 04:26
  • By mrfixit
  • joined 11 Dec'08 - 1,434 messages
  • New York, United States

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Movers & Shakers
Jim Tompkins Jim Tompkins
Chairman of the board, Tompkins Solutions
Director of government affairs, Associated Equipment Distributors
National dealer development manager, Castle Equipment Company
Sales operations, Heli
Global Industry News
edition #1252 - 16 October 2025
In this week’s Forkliftaction News , we report on the GEP Global Supply Chain Volatility Index which shows Asian supply chains are at their busiest since June 2022 while the US and Europe’s supply chains remain under-utilised. One of the report authors describes the situation as being “as stable as it’s going to get”... Continue reading
Global Industry News
edition #1252 - 16 October 2025
In this week’s Forkliftaction News , we report on the GEP Global Supply Chain Volatility Index which shows Asian supply chains are at their busiest since June 2022 while the US and Europe’s supply chains remain under-utilised. One of the report authors describes the situation as being “as stable as it’s going to get”... Continue reading