Hyster E60XM - F108 ....Steer Motor not working - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
Hyster E60XM - F108 ....Steer Motor not working

Hello,
Popped code for worn/low brush - installed new brushes - now the motor will not work at all - no codes - Checked fuses - OK - Contacts burnt but are not pulling in. Anyone run into this problem???. Will wait while i bang head against wall -lol

Posted 16 Oct 2009 01:55
By Prentice
joined 25 Jun'08 - 600 messages
Ontario, Canada

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

Found the contact assembly sticking/hanging up. Replaced with a whole contact assembly. Works good

Posted 16 Oct 2009 23:03
By Prentice
joined 25 Jun'08 - 600 messages
Ontario, Canada

Post a Reply Report this post

is the steering controller ok. sometimes get water in them also check the encoder on the column

Posted 16 Oct 2009 03:09
By kevin_k
joined 25 Nov'05 - 502 messages
dumfriesshire, United Kingdom

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.