Accelerator calibration - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
Accelerator calibration

TCM FG25T3

Replaced the potentiometer on the accelerator is there a way to calibrate it?

Posted 19 Nov 2024 07:14
By Harley_Gwyn
joined 18 Apr'24 - 5 messages
Texas, United States

Harley

Showing items 1 - 1 of 1 results.

Sort messages by:

This is the procedure from the manual.

1. Monitor APS1 (Green/Red Pin 5) and APS2 (Green/White Pin 2) voltages.

2. Adjust sensor mounting angle so that APS1 output is 0.67v to 0.87v when accelerator is fully released and then tighten the sensor mounting bolt.

3. Under the condition of step 2, APS2 output is within 0.33v to 0.43v.

4. Make sure the accelerator fully depressed stroke is within specified range.

5. With the accelerator fully depressed make sure APS1 output is within 4.4v to 4.6v.

6. Double check accelerator released APS1 output is 0.67v to 0.87v.

Posted 19 Nov 2024 08:00
By BLey
joined 31 Jul'20 - 59 messages
Ontario, Canada

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.