Rough idle and throttle response - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
Rough idle and throttle response

Toyota 8FGCU25

I have a unit 8fgcu25 17k hours throwing a A06-3 code. I have very very minimal throttle response and a very tough idle. I've been through all opens relays and fuses. I Had to walk away from it to think a little more. Starting to lean towards a clogged evap or stuck throttle body. But would it code if the throttle motor could not function because of fuel restrictions?

Posted 9 Sep 2020 09:28
By Ty_Nelson
joined 9 Sep'20 - 2 messages
California, United States

Tynelson@service47

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

A dirty vaporizer won't code. Check pot signal from pedal , harness , back to fuse panel. It's a voltage issue. Make sure you check voltages thru fuses not just ohms. The governor, to pedal wiring is what you should check. All loops to ecu. Follow code specs and make sure your Ecuador's signal wire for the pot isn't broken. And all ecu fuses are new.

Posted 10 Sep 2020 22:17
By ron_k
joined 2 Apr'15 - 110 messages
North Dakota, United States

4kliftman

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.