Discussion:
Error code EC-2 not in book Dealer doen't know either anybody

This code stops the units hyd. No lift No tilt or S/S. But will steer and drive. I have 2 units doing this One will reset if you shut it down and restart. then may go a few weeks before doing it again. The other will not reset.
  • Posted 23 Aug 2019 06:56
  • By mick
  • joined 6 May'05 - 7 messages
  • Tennessee, United States
Showing items 1 - 1 of 1 results.
Is there 2 solenoids on the control valve?
1 being the unload solenoid
2 being the enable solenoid

manual shows the EC-1 code for the unload solenoid

i would check both of them for opens or shorts

These solenoids should be triggered by the operator presence system , seatbelt, seatswitch.
  • Posted 23 Aug 2019 16:24
  • By swoop223
  • joined 23 Mar'12 - 3,692 messages
  • North Carolina, United States
You've been swooped!
swoop223@gmail.com

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Movers & Shakers
Todd J Doxsee Todd J Doxsee
National dealer development manager, Castle Equipment Company
Sales operations, Heli
Chief financial officer, Cyngn
Executive vice president and chief commercial officer, East Penn Manufacturing

PREMIUM business

Zhejiang UN Forklift Co., Ltd
Manufacturer of IC forklifts, electric forklifts and warehouse equipment.
Fact of the week
Brothers Adolf ("Adi") and Rudolf ("Rudi") Dassler split their shoe company after WWII due to a bitter feud, and established the rival companies of Adidas and Puma. Their personal animosity and business rivalry divided their German hometown Herzogenaurach. The town became known as "the town of bent necks" due to the intense loyalty to each brand.