How's it going guys. I have a Doosan D35S-7/(DS35S-7) that will cut to 50% power during operation and display CEL. Upon startup the CEL is not engaged, it only engages after operation. I am also unable to read a fault code for it. I have tried turning the ignition to "ON", not "RUN" and cycled brakes then tried accelerator within 5 seconds. I do not see any way to cycle through the diagnostics or display the fault codes so I can actually start troubleshooting this thing. I have the manual, just need a way to display the codes, thanks in advance.
Showing items 1 - 1 of 1 results.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.