yale NDR045EB Code error DTC XX107 - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
yale NDR045EB Code error DTC XX107

Yale NDR045EB

Good day technicians

I have a problem with a forklift YALE presents me with the error code 107 is quite constant, it does not let me operate the equipment correctly.

I restart it with power off and on, but within minutes the code appears and performs the revision of safe connectors in each controller.

They have some idea of this code.

regards

Posted 25 Jul 2018 02:35
By henry_leiva
joined 9 Jun'16 - 8 messages
san salvador, El Salvador

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

That is a Can I/O module fault. The I/O module is mounted on the attachment on the back side of the carriage. You probably have some damaged wires. these wires run through the attachment over the mast and back to the master controller. Check the over the mast harness for damage.

Posted 27 Jul 2018 07:14
By BREWSKI
joined 10 Jan'12 - 1,699 messages
Nebraska, United States

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.