1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. Code 21 on Mod 9

Discussion:
Code 21 on Mod 9

Can someone out there shed some light on this one...."The high side switch that drives positive to valves is opened when it should be closed" ??
  • Posted 14 Feb 2005 23:23
  • By Rick_D
  • joined 14 Feb'05 - 3 messages
  • Michigan, United States
Post a ReplyReport this post
Showing items 1 - 1 of 1 results.
check your wiring harneses on the reach pentagraph for open circuits, especially around where the wires run down the carriage to the solenoid manifold block at the bottom of the carriage.
Also the wire harness in the mast has been known to get open wires and will cause this error.

check it out and let us know what you find

Laterz,
  • Posted 18 Oct 2007 13:48
  • By Jplayer
  • joined 12 Apr'07 - 407 messages
  • North Carolina, United States
John Player Jr
_________________
LiftOne, LLC
Charlotte, NC
Email: jplayer@liftone.net
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Fact of the week
In March 2002, identical twins in Finland died on the same day in similar accidents within hours of each other. A 70-year-old man was killed by a truck while cycling; hours later, his twin brother was killed by a truck on the same road, about a mile away, before the family had been informed of the first accident.
Toplift Ferrari TFC36-48
Toplift Ferrari TFC36-48 2021
Stoney Creek, Ontario, Canada
Used - Sale
USD1
Taylor XC300M
Taylor XC300M
Morgantown, Pennsylvania, United States
New - Sale & Hire
|

PREMIUM business

REPOWERTEK Inc
PRIME battery regenerators: the only technology and product line-up worldwide that overcomes the technical limitations of battery regeneration.
REPOWERTEK Inc
From the forum discussions …
"ForklifttSteve from Mississippi seeks advice on resealing a leaking valve cover on a Mitsubishi 4G64. Ron K from North Dakota suggests 'Use the loctite flange sealant. It has been the best so far I've used in 30 years.'"
ForklifttSteve, United States
Read & Post in our Forums
Machinery-onQ
Machinery-onQ.com is the one place to source and sell all your new and used machinery.
Find equipment for sale | Add a listing
VISIT
machinery-onQ.com
Machinery-onQ