I have 7hbw23 toyota pallet jack with error codes c14 and e115 e112 trying to find code list or repair manual any where any help out there
Showing items 1 - 3 of 3 results.
Hard to say if those aftermarket switches are bad. Make sure the bracket holding them is not bent, and Arm bushings are not shot, because switches will be out of sequence.
i replaced both angle switches and works fine but once in awhile the e112 comes back.i checked all the wiring for chaffing could not find anything. [note] got the switches from mcmaster carr same type
Arm angle codes. Check or replace both switches at base of handle. And always check battery under load, and each battery one by one.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.