Discussion:
Code A4 setting

Anybody come across code A4 on a cat NRR40?
  • Posted 30 Sep 2020 02:23
  • By Mike_McDonald
  • joined 30 Sep'20 - 2 messages
  • Ontario, Canada
Mike McDonald
Showing items 1 - 1 of 1 results.
not much on this code
the code description says "This code indicates that the COP on the VFC has timed out. This code should never be detected in normal operation.
To clear it turn key off/on
if code presists the only corrective actions it lists
1 - check static strap and circuitry (make sure it has a static strap, it is touching the floor and if there is no static strap put one on it.)
2 - Use D-Cat, version 2.8 or higher to resolve code. See "supplement - Dealer/Technitian configuration program: user instructions" on page 7-3 in service manual.
3 - the vehicle manager may be bad

just a guess but chances are it's a static strap issue
  • Posted 1 Oct 2020 20:02
  • Modified 1 Oct 2020 20:03 by poster
  • By swoop223
  • joined 23 Mar'12 - 3,691 messages
  • North Carolina, United States
You've been swooped!
swoop223@gmail.com

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".
Movers & Shakers
Jeannette Walker Jeannette Walker
CEO, MHEDA
President, European Rental Association (ERA)
Chief marketing officer, JLT Mobile Computers
Chief executive officer, East Penn Manufacturing