jack will roll forward but not back and when lifting up it makes a constant clicking noise - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
jack will roll forward but not back and when lifting up it makes a constant clicking noise

Crown WP2300 SERIES

checked all the wires they seem to be in good shape as far as I can tell. It was taken from another guy who didn't want it so I'm working on it and just put a new controller on it but cant figure out why it wont roll backwards

Posted 21 Jun 2018 08:56
By burnell_s
joined 21 Jun'18 - 1 message
Louisiana, United States

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

Clicking when lifting is probably low battery, put a volt meter on the battery when operating, should be over 21v on lift. Drive problem will be the throttle potentiometer in the handle which has fwd/rev contacts built in, very common fault on these units.

Posted 5 Jul 2018 17:51
By techno_nz
joined 9 Aug'13 - 138 messages
Canterbury, New Zealand

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.