Is it possible to convert a machine with joystick to mini levers. I have tried plugging a mini lever control box into the truck but i geta can bus fault. Is there a setting in the dash that can be changed? Any help apprieciated.
Showing items 1 - 20 of 20 results.
Through service password? Ill look into it tomorrow, thanks!
Any ideas on latest version number, or full serial required?
if your truck has up to date software you can switch between 3-4 lever MLM or joystick via the display
It is a add on to PCST. It is actually a stand alone program.
Would that be done through pc service tool or different?
No jumper available. You can request a new CDF file for three lever only. You will need to get this installed by a Yale tech.
Same issue with number 4, but no 4th lever fitted. Fitting an extra lever clears the fault but an expensive work around, does anyone know if there is a jumper available? If so part number at all?
not sure, but you may need a jumper plug into the 4th lever harness plug.
No 4th lever but I think You can plug one into that board.they can give out all sorts of random code's when they fail.
every thing works fine but it throws an error code up about the 4 mini lever is OORL but there isn't a 4th mini lever fitted and its not turned on through the dash. Its been a strange one.
Not available separate to my knowledge. I've seen them boards fail a couple of times.
There was a problem with the PCB inside of the MLM. Is this available seperately? i can't find a part no. for the PCB, it has got the number 251941A but that isn't recogonised by TVH.
VSM need calibration after settings!
Regards
Petko thank you for the info. I found a setting in the dash options for input device. i couldn't see this option anywere in the manual.It worked straight away. i have got an error code 523249-4 now, some sort of lever 4 input error. i think it is just a parameter needs changing.
VSM need setting and calibration
Regards
Hi, Leon,
Ive looked at my notes and Ive come to the conclusion that the mini pod and joy sticks should be interchangable, is the pod you are using to substitute the joystick with new or second hand Im thiking canio problem possibly a broken wire in the pod or connector, other than that you should be able to fit the pod and set it up through the dash display.
Regards Titus
Hello,
Send me mail.
Regards
I have already got the part no. What else needs to be done to allow the mini levers to work. I get a can bus error.
Mini lever module MLM p/no 580089967
I'm not certain if you can do it with a GLP but you can do it with the Yale MR range, you may need a harness supplement or conversion to suit mini levers, I don't see why it should not be possible,
Regards Titus
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.