Hello! Dear collegues!
I have some problem. Display(control processor) not work, LCD not light. I take display from another truck(RX50), and install on breaking forklift. Display show error A2111. After installation back to the working forklift error persists! What to do?
Many thanks for help!
Showing items 1 - 2 of 2 results.
Must be careful when changing displays from one machine to another, because not all have the same SW.
Some trucks have fiited black traction AC controllers and older version have fitted grey AC inmotion controllers. They are NOT compatible. When you change the display the truck will ask you "D_VALID EEPROM" if press yes (PRG) the display program will be installed. If press no, It confirms its own program and will be recorded on the console.
Regards
Hello Vova,
It seems to be that you got a serious problem.
You have 2 trucks RX50 and are they the same year of manufacturing ?
Error No A2111 : Internal error in control processor (Display).
- Either the Display is defective : Open the LCD to check inside and check to see if the 3 VDC battery of LCD is enough ?
- Or the wrong configuration / parameterise : need to connect to the laptop: Using Still winflash to flash the truck software again and reload the parameters again.
Good luck
Nuna
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.