any ideas why i can be using rss40 let it set 10-20 minutes and it will not move only lift then turn key off leave set hr or so and wala it runs again
Showing items 1 - 5 of 5 results.
I would think that would cause a continuous problem not a intermittent problem. But I'm glad it's working for you
turned out switch right below steer handle with 3-4 wires was wired improperly!!!
thank u ill give that a try.......be cheap fix !!!!
I always replace the main motor contactor in the Rss40 lifts. The contacts inside of them start to get dirty and you'll get the occasional welded contact error.
I get the White Rodgers 120-904 24 volt contactor off eBay for around $25
when u pull handle down and here a click u know its gonna go. when there is no click u know u are stuck for awhile
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.