Report this forum post

I changed out all 4 spark plugs with new. (one of the old ones had a smaller gap than the others) and now the motor fired up and is running more smooth than it has for a while. The plugs were only two months old and were taken out and wire brushed last month.

When I pulled the head off two months ago, I replaced the radiator as well as ran blue devil through the engine. This put a clog is the heater core coolant line and caused it to blow. I washed out the heater and replaced the coolant line. The lines to the radiator are in good condition and the thermostat is new after the blue devil. I will check the LP line into the truck for leaks.

Do you know at what voltage the alternator should be charging the battery? My battery says:
12.5 standing
10.5v starting
12.35v running Idle
12.35v running throttle up
12.35v with heater, lights, etc.
  • Posted 24 Nov 2016 01:59
  • By Vantech
  • joined 23 Nov'16 - 5 messages
  • Pennsylvania, United States

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Hangcha CBD15
China
Used - Sale
USD1,600
UN Forklift FB25N1LZ1
HANGZHOU, Zhejiang, China
New - Sale
Latest job alerts …
Dallas, TX or Lexington, KY, United States
Tampa, United States
Marietta, United States
Tampa/Orlando Florida, United States
Hangcha CBD15
China
Used - Sale
USD1,600
UN Forklift FB25N1LZ1
HANGZHOU, Zhejiang, China
New - Sale
Latest job alerts …
Dallas, TX or Lexington, KY, United States
Tampa, United States
Marietta, United States
Tampa/Orlando Florida, United States

Showcased in the Virtual Expo

Movers & Shakers
Steve Dimitrovski Steve Dimitrovski
Director sales for Australia and New Zealand, Swisslog
General Manager, Forkpro Australia
Global CEO, Swisslog
Board member, UKMHA