I have a Linde E30P-600-02 SN: 61X336L0095030. No hydraulic functions (steer or lift / lower). Forward / reverse travel is fine. Did manage to have steer and lift / lower for a few minutes by fooling with the plug that goes into the hydraulic module (board). Have traced seat switch, OK.
Suspect the problem is with the hydraulic module but the momentary operation when manipulating the module plug has me considering a connection issue. Wiring diagram or advice would be appreciated.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.