Hi Baz, hope you can help with this.I've got a Lansing FOER15.1 3.0PFL electric counterbalance truck 72v.
The truck will move from a standing start (either forwards or backwards) ok, but when more load is applied i.e. slight gradient or more speed, the contactor solenoid is releasing creating a short sharp arc and surge as the circuit breaks.You have to release the accelerator fully to be able to activate the solenoid again.Sometimes it will also happen if another function is used at the same time like tilt/lift.The control board is a HYTRON V if that is any help ? Cheers, Mick
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.