1. Home
  2. Forums
  3. Report post

Report this forum post

Wow == the guys are right the six screws on the control card are your TB inputs & outputs that is a simple truck to work on.

TB1 should have batt volts also 2 & 3 & 4 you can make a jumper wire from 2-3 this is usually all your brake switches etc - when you have power at these pionts 5& 6 which are fwd & rev should come in when control handle is moved check all of the 15 amp glass fuses on the top right hand side of door panel above platform

Post your results & we will go from there
  • Posted 27 Jul 2007 13:12
  • By FrankieW
  • joined 25 May'06 - 22 messages
  • British Columbia, Canada
FrankieW Technician

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Fact of the week
In May 2023, a Belgian Malinois named Wilson played a key role in the rescue of four children lost in the Amazon jungle. The young children were missing for 40 days after a plane crash that killed their mother and other adults. Wilson tracked the children's footprints, leading the military to their location.

Showcased in the Virtual Expo

Fact of the week
In May 2023, a Belgian Malinois named Wilson played a key role in the rescue of four children lost in the Amazon jungle. The young children were missing for 40 days after a plane crash that killed their mother and other adults. Wilson tracked the children's footprints, leading the military to their location.