can use the Accelerator pedal with the following and do "the pedal dance" to clear codes and resewont work tho if the accelerator pedal sensor is bad also if the code is still active and the problem hasnt been repair code will come right back

"the pedal Dance"

Turn the ignition switch on with accel. pedal released,after 3 seconds fully depress the accel pedal 5 times within 5 seconds(end in released position). After 7 seconds(timing is very important...1 mississippi 2 mississippi etc....) press and hold down accel pedal for approximately 10 seconds(again timing) until the hour meter starts blinking, release pedal and push down and hold again for 10 seconds) hour meter should be on with no codes showing,shut key off and test to see if codes cleared