Hmm, Let me make sure we are on the same page here. TPS: Throttle Position Sensor. Located at accelerator pedal lever. Blackwith lever and roller, two phillip screws mount it. Adjustable. The sensor can be replaced but I was once told by someone not to try to adjust the two bolts and jam nuts. If it went bad to just order the whole assy. I have dealt with these before under different circumstances. For instance if the sweep is not set up right engine will have low power and overheating issues.
By the way are you using the 2.41 diagnozer. Maybe I should go back to the older version.
Don't recall seeing:
Perform "Throttle Valve Closed Position Learning" if disconnecting
connector. Perform "Throttle Valve Closed
Position Learning and Idle Air Volume Learning" if replacing
electric throttle control actuator. (Refer to (EC-13),
"Throttle Valve Closed Position Learning and Idle Air Volume
Learning".)
Or maybe I should clear the values to see this option.???