Transmission toss sensor. Check wiring.
WIRE # 108, (GREEN) = SENSOR GROUND
WIRE # 256, (RED) = SENSOR SUPPLY
WIRE # 547, (WHITE) = SENSOR SIGNAL 1
WIRE # 546, (WHITE) = SENSOR SIGNAL 2
At sensor connector, measure voltage across sensor supply and sensor ground. Should be 5v.
If not move the neg lead of meter to frame ground and see if you have 5v.
Also check for breaks back to the vsm.
Order the manual from the dealer or an outside dealer source. It will save you many headaches.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.