Report this forum post

The manual also says the LED should not be flashing. In my experiences I have found AL10 with flashing LED to be a battery or cable issue, or voltage drop at controller B+. If controller doesn't get battery voltage on start up it will drop out.
  • Posted 15 Feb 2012 13:01
  • By meliftman
  • joined 31 Jan'12 - 209 messages
  • Alabama, United States
Liftman
Retired
Elberta, Al.

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Fact of the week
According to studies published in the English Journal of Medicine, the impact of daylight savings is revealed by a 24% increase in heart attacks on the Monday following the spring shift forward. When clocks move back in autumn, heart attacks drop by about 21%, suggesting that loss of sleep is an important driver.

Showcased in the Virtual Expo

Movers & Shakers
Sue Tomic Sue Tomic
Board chair, Australian Supply Chain & Logistics Association (ASCLA)
Strategic business development manager, Heli Materials Handling Oceania
Chief executive officer, Hire Industry Association of New Zealand (HIANZ)
Chief executive officer, Australian Supply Chain & Logistics Association (ASCLA)
Manitou MH25-4
Braeside, Melbourne, Victoria, Australia
Hire
Toplift Ferrari TFC36-48
Stoney Creek, Ontario, Canada
Used - Sale
USD1
Fact of the week
According to studies published in the English Journal of Medicine, the impact of daylight savings is revealed by a 24% increase in heart attacks on the Monday following the spring shift forward. When clocks move back in autumn, heart attacks drop by about 21%, suggesting that loss of sleep is an important driver.