Report this forum post

I HAVE REPLACED THE SENSOR ON THE STEERING THAT WAS BROKEN AND THE WHEELS WERE GOING IN DIFFERENT DIRECTIONS. IT FIXED THIS FAULT BUT NOW WHEN YOU GO TO FULL LEFT THE DRIVE CUTS OUT AND CODE C1 APPEARS ON THE DASH. I HAVE TRYED TO ADJUST THIS SENSOR AND CAN GET RIGHT TURN OK BUT LEFT TURN ONLY 3/4 THEN STOP AND C1 CODE.
ANY IDEAS ?
THANKS
  • Posted 22 Mar 2011 11:30
  • By mrforklift
  • joined 10 Aug'09 - 39 messages
  • Queensland, Australia

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Global Industry News
edition #1237 - 3 July 2025
While innovation and new technology are evolving at what seems to be an ever-increasing pace, the need to capture the data (telemetry) from this tech, and the ability to utilise it (telematics) for efficiency and cost savings, is one area attracting more and more attention ... Continue reading
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".