hi folks,
I have a raymond reach truck EZ-C. My problem is that lift cylinder goes up when i use the aux functions both retract in/out, sideshift and tilt. This was happened when we replaced a new hyd. pump. But as we test the unit in a couple minutes the unit sames alright, back on its normal operation. This problem was occurred in around 20 minutes testing and after that back on normal.
I suspected that the air intake into the hyd system triggered this problem. I am not sure for now where the problem is. If anyone have an idea or encountered same problem from this unit?. Please, ideas and suggestions will be appreciated.
Thank you so much in advance! and God Bless us all!