So through browsing the forums here, I was able to figure out I had codes 1 and 3. I also was able to clear code 1, and found that code 3 was broken wires at the vacuum sensor. There was 1 wire that was stripped but not off completely. We disconnected the battery to clear the code and fixed the wire, reconnected the battery and now it seems to run worse. And now when jumping the harness, the engine light flashes continuously. Does that just mean the harness is jumped, or does it mean something else?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.