Good to know. Thanks!
I just poked my head in the motor side of things this morning and noticed the brushes are suuuper low. https://i.ibb.co/rQF65XS/Brushes.jpg As much as I want to suspect that those are the cause of my issue (it would make sense), there's still continuity between the wires so I would think I would be seeing some movement, even if it was weak. Please correct me if I'm wrong. Also, I have NO idea how I would change those brushes without pulling the whole motor out and apart.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.