Rocky,
That code is for TOSS Sensor Direction or Direction Check Input Failure. Since you just replaced the sensor, you may want to install old sensor and see what happens. Possible failed connection at the TCU. Check all the wires from the sensor to the TCU. Possible bad wire crimp in a new harness. Verify from old harness to new that all wires are in the correct location. Does the trans brake limited code still show after replacing the sensors? If so, you may have a new sensor that is not good. Good Luck
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.