Having a GD code changed out encoder and prox. switch still throwing GD code. I found five wires from the harness behind the steering motor pinched off. I chased them to the other end at the steering amplifier. None of the numbers on either end match. Does anyone have a wiring diagram it goes from two plugs to a 10-pin plug on the amplifier. The wires pinched off on the amplifier side are JX2-3, JX2-4, JX2-7, JX2-8 & JX2-9. The wires pulled off from the two-pin plug at the motor end are JCS1-1 & JCS1-2. The other wires pinched off come from the motor area it is a 4-pin plug but only three slots are used these wires are labeled JCS4-1 , JCS4-3 & JCS4-4 Does anyone know what wire from below connects to the amplifier plug wire numbers?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.