Correct me if I misunderstood what you meant, but I'll explain the tests I just did. I checked continuity from the positive at access 2 to the other end of the cable that is at the top of the P contactor and it tested at 1.4 ohms, with the contactors not closed I don't get a reading any farther than that. Then I powered on the truck with the error displayed, and I have 35 volts at the battery positive all the way to the contactors but then just 5 volts at access 2 but obviously with the error, the contactors aren't closed. Am I missing anything by what you was meaning?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.