ACCESS 5 STEERING FEEDBACK (RPS1) MOVEMENT WITH NO TILLER MOVEMENT (RPS2).
The traction function is disabled.
Step 1: The RPS1 feedback shows drive tire movement of approximately 45° without RPS2 operation.
* If:Manually turn the drive tire while the lift truck is
turned on.
- Then turn off the lift truck. Then turn on the lift
truck.
* If:The drive tire moved because of a collision.
- Then check for and repair damage.
* If:The drive tire turns without tiller **** operation.
- Then continue to Step 2.
Step 2: Check RPS1 and RPS2 for problems.
* If:RPS1 and RPS2 are satisfactory.
- Then replace Access 5 or M4.