Report this forum post

well you may not be getting a full drop if the system is faulting that quick.
before you order the drive board i would pull out the logic and check the boards underneath. there is a diode board under there that sometimes burns up, the diodes will be obviously burned from the high amp draw from low battery use.
check that before you buy anything.
  • Posted 31 Dec 2021 03:47
  • By swoop223
  • joined 23 Mar'12 - 3,692 messages
  • North Carolina, United States
You've been swooped!
swoop223@gmail.com

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Movers & Shakers
Rob Ott Rob Ott
Executive vice president and chief commercial officer, East Penn Manufacturing
President, Logistics UK
Director of dealer development East Coast, Big Joe Forklifts
Vice president, customer, TVH Americas
Movers & Shakers
Rob Ott Rob Ott
Executive vice president and chief commercial officer, East Penn Manufacturing
President, Logistics UK
Director of dealer development East Coast, Big Joe Forklifts
Vice president, customer, TVH Americas